Constant Temperature & Humidity Incubator, TOPTION Lab Supplies
TOPTION brand constant temperature & humidity incubator are widely used for microbial culture, physical
performance test objects, insects and small animals breeding, plant germination, biological products, storage,
chemical storage and drug test.
TOPTION constant temperature and humidity box by box, heater, refrigerator, circulating fan, controller, temp.
sensor, humidity sensor, humidifier, etc. It can bring the temperature and humidity in the cabinet according to
user needs are stable in a certain numerical value.
Technical indicators of TOPTION constant temperature & humidity incubator, laboratory
1. The temperature control range: 0 ~ 50 ℃ .
2. The temperature fluctuation degree, plus or minus 1.0 ℃ .
3. The temperature deviation: plus or minus 1.0 ℃ .
4. The temperature is not uniformity: 1.5 ℃ or less .
5. The humidity adjusting range: 50 ~ 95% RH .
6. Humidity, volatility: + / - 7% RH) (the national industry standard.
7. Heating time: 10 ℃ to 40 ℃, less than 60 minutes .
8. The cooling time: 40 ℃ to 10 ℃, less than 60 minutes .
9. The heating power: 150 w ~ 150 w (different volume power, see signs of various sizes) .
10. The compressor power: 130 w ~ 130 w (different volume power, see signs of various sizes).
11. The compressor time delay time: more than 3 minutes .
12. Refrigerant: everything (fluorine-free refrigeration) .
13. The noise: < 70 db .
14. Work style: run continuously .
15. Working conditions: temperature 0 ~ 40 ℃, humidity below 90% RH, no corrosive gas .
16. The power supply: 220 + 22 v, 50 + / - 0.5 HZ .
Your benefits of this type laboratory incubator:
1. The high reliability. Due to computer control, and has open circuit protection, overtemperature protection,
thermistors thermistor function such as short-circuit protection, especially the system to establish a set of
simulated overtemperature protection device, to ensure the computer failure or circulation fan damage such
extreme cases, can guarantee the absolute security of instrument.
2. Light touch switch, programmable computer control, can connect with computer or additional printer real-
3. The air duct ventilation mode, the soft wind even, temperature uniformity is good.
4. Fuzzy control, thus cooling way, even if the gap in the temperature fluctuation are also small, generally less
than + / - 0.5 ℃. And after cooling does not exist the phenomenon of reheat, therefore both energy saving and
extend the life of the compressor.
More laboratory incubator customize welcome contact email@example.com 24h/7days service.